SPAX® STAINLESS STEEL WASHER HEAD T STAR - 8.0 X 80 - 50 PCS

Application

• For use outside (e.g. carports, playground equipment, pergolas, porches, bridges, bridge plank flooring, balconies)
• Fastening of sheet metal (e.g. solar roof hooks)

Advantages

• Better tightening of connections also of warped boards
• Washer head guarantees higher beam supporting forces and allows savings with regard to piece numbers and working time
• A] Wide overlying washer head Washer head
• B] Stainless steel A2 II: high corrosion protection
• C] SPAX 4CUT cutter (For screw lengths of 160 mm and larger): significantly reduces the screwing in torque
• D] SPAX T-STAR plus: secure bit grip, no cam-out effect, optimal force transmission

Features

1. SPAX 4CUT point: allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres
2. SPAX ground serrations: up to the point – quick and secure fastening

The non-threaded part must completely reach through the upper component. The washer head then pulls the upper component tighter to the lower component with each thread rotation

Advantages of a washer head compared to a countersunk head:

Further advantage:
Also narrow and thin wood cross-sections can be bolted with 6 mm Ø thread.